360 REPREVE® Men's Fleece Bush Shirt - Long Sleeve

#262975 in stock at Hamilton

was

Valid until or while stocks last

Buy in bulk and save

Buy & save

Choose Delivery Method:


Need help? call 0800 731 266

Product Description

Billions of plastic bottles go into landfills every year, but now you can help to do something about it. Proudly introducing our new 360 Range featuring REPREVE® recycled polyester, which is constructed from recycled plastic bottles. You’ll be ready for whatever the day throws at you with our new range of 360 REPREVE® Bush Shirts. Our 360 REPREVE® Mens Long Sleeve 360gsm Bush Shirt is the ultimate workwear top, which we describe as our "all wheel drive, all terrain gear". Whatever you are doing on or off farm, this product will go the distance.

Features

  • Recycled PET bottle count - approximately 74 500ml PET bottles were recycled to produce each 360 REPREVE® Mens Long Sleeve 360gsm Bush Shirt.
  • We recommend layering with our 360 Mens 4 Piece Fleece Pack and 360 Mens Merino Base Layers for the ultimate winter combination.

Benefits

  • Designed to provide superior comfort with extra weather protection in cold, wet and windy conditions, our 360 REPREVE® Long Sleeve Bush Shirt delivers a breathable, warm fit with a windproof and waterproof TPU membrane.
  • This garment is built to perform, while at the same time working hard to be better for the environment.
Size Guide
Men's Short Sleeve Tee
S M L XL XXL 3XL
1/2 Chest (cm) 54 57.5 61 64.5 68 71.5
Total Length (cm) 76 77.5 79 80.5 82 83.5
 
Men's Bush Shirt
S M L XL XXL 3XL
1/2 Chest (cm) 56.5 60 63.5 67 70.5 74
Back Length (cm)
Short Sleeve 78 79.5 81 82.5 84 85.5
Long Sleeve 92 93.5 95 96.5 98 99.5
 
Men's Dry Seat Pant
S M L XL XXL 3XL
1/2 Waist Relaxed (cm) 36.5 40 43.5 47 50.5 54
1/2 Waist Extended (cm) 50 53.5 57 60.5 64 67.5
Outleg (cm) 111 112 113 114 115 116
Warranty

360 Apparel and Accessories Warranty Policy

Farm Source warrants all 360 apparel to be free of defects in material or workmanship for a period of 12 months from the original date of purchase, when purchased from an authorized Farm Source store. The apparel warranty covers defect of workmanship and materials, but does not cover damage caused by accident, improper care, negligence, normal wear and tear, or the natural breakdown of colours and material through time, exposure or extensive use.

If a 360 product is found to be defective after inspection by a Farm Source representative, Farm Source will replace or credit the product as per the Farm Source Return Policy. Farm Source is not liable for any damages, losses and/or costs incurred resulting from the loss or usage of our products.

Limited Warranty Policy Limitations

Warranty policy is subject to the following limitations:

  • All warranty claims must be accompanied by the original purchase receipt from an authorized Farm Source store.
  • All warranty claims must be received within 12 months of purchase.
  • Repaired or replaced products will be covered under a new 12 month warranty.

Examples of clear manufacturing faults or defects from new:

  • Missed stitching where a seam or pocket is not caught (From new)
  • Fabric Faults like a hole / mark on garment / fabric pill / press burn (From new)
  • Domes / Zips / Snaps / Buttons broken or crushed or alignment issue (From new)
  • Water proof seam sealing tape missed / lifted / burnt (From new)
  • Wrong size label applied to garment (From new)

All above are clear manufacturing and fabric defects or faults and are covered under manufacturer’s warranty for credit

Examples of common manufacturing faults or defects identified through use:

  • Stitching opening up / broken causing a seam to come apart (Need to identify if this has happened through normal wear and washing. An example where this would not be covered under warranty is if the garment was caught up and yanked causing the fault. In this scenario there should be extra signs of stress around the area on the fabric).
  • Holes in garments are usually identified quickly and while the garment is new. (If a hole is identified after a long period of use you should look to see if it has been caused through a puncture / snag / flame or spark as these would not be covered under warranty).
  • Domes / Zips / Snaps / Buttons broken or not working. (These items can be brought to light through use and are a clear warranty cover. Upon return the assessor just needs to identify if it is through normal wear and tear or if an area has been damaged through an external force or impact or heat as these would not be covered under warranty).
  • Water proof garment leaking or seam sealing tape lifting after use. (Washing and care instructions need to have been followed, garments advised to be leaking need to be inspected for external punctures or abrasion that have damaged the garment through misuse)